Comments on: Looking for the Perfect Dashboard: InfluxDB, Telegraf, and Grafana – Part XXV (Monitoring Power Consumption)

By: jorgeuk

jorgeuk — Wed, 17 Mar 2021 21:39:29 +0000

In reply to Franco. Hello Franco, will need to convert it all, could take me some time. You have all the same hardware yes?

By: Franco

Franco — Wed, 17 Mar 2021 14:32:51 +0000

Hey Jorge, I’ve tried to run your script remotely with no success. Could you perhaps do a post on using node-red instead of the powershell script?

By: jorgeuk

jorgeuk — Thu, 07 May 2020 20:43:47 +0000

In reply to Daimian Williams.

Hello Daimian,
I am in fact in the UK 🙂 Yes, change the values it is simple, they are just on the queries, I am with British Gas and I pay 0.18 Kwh, and a fixed 0.26/day, take a look

By: Daimian Williams

Daimian Williams — Thu, 07 May 2020 20:20:53 +0000

Hi,

I have recently started dabbling into Linux having never touched it before and I have to say this is because of you!

If you ever arrive in the UK, I owe you a beer for the amount you have taught me!

One question, I am just about to purchase the OWL USB Meter, however were does Grafana get the stats for cost from? Is this easily changable (of course, different power prices etc.)

Thanks,
Daimian

By: jorgeuk

jorgeuk — Wed, 06 May 2020 16:42:31 +0000

In reply to Jose R. Alvarez. Thank you Jose, click F5 and check the new dashboard :)

By: Jose R. Alvarez

Jose R. Alvarez — Wed, 06 May 2020 16:30:54 +0000

Sorry for my previous post.
I don’t know why is shown on a different topic.
Regarding the UOM: on the right is written watts, but units on the axes are wh.
Probably the panel of min consumption would be watts.
There is nothing indicating that bars are referred to left axe and points to right axe.